Cold Rolled Steel Sheet in 300 series Stainless Steel for
Decoration Contruction
Compared with ordinary carbon steel, the chemical composition of
stainless steel is mainly increased by alloying elements such as
Cr, Ni, Mn, and Mo. The material characteristics of the two are
very different.
The corrosion resistance of stainless steel mainly depends on the
content of Cr. Mo and N can also enhance its corrosion resistance;
Ni is mainly used to ensure the microstructure and mechanical
properties of stainless steel.
Chemical Composition:
| Unit | C | Mn | P | S | Si | Cr | Ni |
| <= % | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 18.0-20.0 | 8.0-11.0 |
Machine Capability:
| Yield strength (N/mm2) | Tensile strength (N/mm2Mpa) | Elongation | Hardness |
| >=205 | >=520 | >=40 | HB <=187 HRB <=90 |
1. Material:
Carbon Steel:Q195 Q235 Q345 etc
200 series:201 202
300 series :301 304 304L 309S 310S 316L 317L 321 904L
400 series :409L 410 420 430 439 441
2. Size:
Width: 1219mm or as customer required
Thickness: 1-5mm
We have a professional processing factory to cut stainless steel
sheets.
3. Surface:
No.4 | It has good gloss and fine lines on the surface. Processing
technology: Polishing and tempering rolling of 2D products or 2B
with 150 ~ 180 abrasive material (JIS R6002). |
HL | It is silver-gray with hair streaks. Processing technology: Polish
the 2D product or 2B product with a suitable size of abrasive
material to make the surface appear continuous grain. |
8K | It is in a mirror state. Processing technology: 2D or 2B products
are ground and polished to a mirror effect with a suitable abrasive
material. |
2B | It is silvery white and better gloss and flatness than 2D surface.
Processing technology: hot rolling + annealing shot peening
pickling+ cold rolling + annealing pickling + quenching and
tempering rolling. |
BA | The surface gloss is excellent and has a high reflectivity, just
like the mirror surface. Processing technology: hot rolling
+annealing shot peening pickling + cold rolling + annealing
pickling + surface polishing + quenched and tempered rolling. |
1D | surface has discontinuous particles, also known as matte.
Processing technology: hot rolling + annealing shot peening
pickling +cold rolling + annealing pickling. |
2D | It is slightly shiny silvery white. Processing technology: hot
rolling + annealing shot peening pickling + cold rolling +
annealing
pickling. |
No.3 | has better gloss and rough surface. Processing technology:
Polishing and tempering rolling of 2D products or 2B with 100 ~ 120
abrasive materials (JIS R6002). |
SB | The surface is smooth, the texture is clear, the texture is
delicate, the appearance is comfortable, and the taste is
high-grade.It is widely praised by consumers especially in kitchen
appliances. |
You could also ask for other special treatment.We have a stainless steel processing factory in Wuxi.
4. Standard:
GB JIS ASTM EN DIN AISI
5. Packing:
Standard stainless steel shipping packaging or as customer required.
